@horchi funktioniert das irgendwie das ich den "Partyschalter" von Wert 0 auf 1 stellen kann?
Code
pi@raspberrypi:~ $ p4 menu | grep -i "Partyschalter"
1441) Address: 0x0017, parent: 0x0136, child: 0x0000; 'Partyschalter'
1443) Address: 0x0102, parent: 0x0136, child: 0x0000; 'Partyschalter'
pi@raspberrypi:~ $ p4 getv -a 0x0017
value 0x17 is 0
pi@raspberrypi:~ $ p4 getp -a 0x0017
Address: 0x0017; Unit: %; Digits: 0; Current: 60; Min: 0; Max: 95; Default: 60 - Factor: 1 (factor already applied)
=> 60%
pi@raspberrypi:~ $ p4 setp -a 0x0017 -v 1
Parameter 0x0017 changed successfully to 1%
pi@raspberrypi:~ $ p4 getp -a 0x0017
Address: 0x0017; Unit: %; Digits: 0; Current: 1; Min: 0; Max: 95; Default: 60 - Factor: 1 (factor already applied)
=> 1%
pi@raspberrypi:~ $ p4 setp -a 0x0017 -v 60
Parameter 0x0017 changed successfully to 60%
pi@raspberrypi:~ $ p4 getp -a 0x0017
Address: 0x0017; Unit: %; Digits: 0; Current: 60; Min: 0; Max: 95; Default: 60 - Factor: 1 (factor already applied)
=> 60%
pi@raspberrypi:~ $
Alles anzeigen
Das habe ich schon alles Probiert, aber da verstelle irgendwelche % Werte statt 0 und 1 usw...
values verstellen funktioniert anscheinend nicht, geht auch nicht in der Web GUI